The following shell builtin commands are inherited from the Bourne Shell. These commands are implemented as specified by the posix standard.
: (a colon): [arguments]
Do nothing beyond expanding arguments and performing redirections.
The return status is zero.
. (a period). filename [arguments]
Read and execute commands from the filename argument in the
current shell context. If filename does not contain a slash,
the PATH variable is used to find filename.
When Bash is not in posix mode, the current directory is searched
if filename is not found in $PATH.
If any arguments are supplied, they become the positional
parameters when filename is executed. Otherwise the positional
parameters are unchanged.
The return status is the exit status of the last command executed, or
zero if no commands are executed. If filename is not found, or
cannot be read, the return status is non-zero.
This builtin is equivalent to source.
breakbreak [n]
Exit from a for, while, until, or select loop.
If n is supplied, the nth enclosing loop is exited.
n must be greater than or equal to 1.
The return status is zero unless n is not greater than or equal to 1.
cdcd [-L|-P] [directory]
Change the current working directory to directory. If directory is not given, the value of the HOME shell variable is used. If the shell variable CDPATH exists, it is used as a search path. If directory begins with a slash, CDPATH is not used.
The -P option means to not follow symbolic links; symbolic links are followed by default or with the -L option. If directory is ‘-’, it is equivalent to $OLDPWD.
If a non-empty directory name from CDPATH is used, or if ‘-’ is the first argument, and the directory change is successful, the absolute pathname of the new working directory is written to the standard output.
The return status is zero if the directory is successfully changed,
non-zero otherwise.
continuecontinue [n]
Resume the next iteration of an enclosing for, while,
until, or select loop.
If n is supplied, the execution of the nth enclosing loop
is resumed.
n must be greater than or equal to 1.
The return status is zero unless n is not greater than or equal to 1.
evaleval [arguments]
The arguments are concatenated together into a single command, which is
then read and executed, and its exit status returned as the exit status
of eval.
If there are no arguments or only empty arguments, the return status is
zero.
execexec [-cl] [-a name] [command [arguments]]
If command
is supplied, it replaces the shell without creating a new process.
If the -l option is supplied, the shell places a dash at the
beginning of the zeroth argument passed to command.
This is what the login program does.
The -c option causes command to be executed with an empty
environment.
If -a is supplied, the shell passes name as the zeroth
argument to command.
If no command is specified, redirections may be used to affect
the current shell environment. If there are no redirection errors, the
return status is zero; otherwise the return status is non-zero.
exitexit [n]
Exit the shell, returning a status of n to the shell's parent.
If n is omitted, the exit status is that of the last command executed.
Any trap on EXIT is executed before the shell terminates.
exportexport [-fn] [-p] [name[=value]]
Mark each name to be passed to child processes in the environment. If the -f option is supplied, the names refer to shell functions; otherwise the names refer to shell variables. The -n option means to no longer mark each name for export. If no names are supplied, or if the -p option is given, a list of exported names is displayed. The -p option displays output in a form that may be reused as input. If a variable name is followed by =value, the value of the variable is set to value.
The return status is zero unless an invalid option is supplied, one of
the names is not a valid shell variable name, or -f is supplied
with a name that is not a shell function.
getoptsgetopts optstring name [args]
getopts is used by shell scripts to parse positional parameters.
optstring contains the option characters to be recognized; if a
character is followed by a colon, the option is expected to have an
argument, which should be separated from it by white space.
The colon (‘:’) and question mark (‘?’) may not be
used as option characters.
Each time it is invoked, getopts
places the next option in the shell variable name, initializing
name if it does not exist,
and the index of the next argument to be processed into the
variable OPTIND.
OPTIND is initialized to 1 each time the shell or a shell script
is invoked.
When an option requires an argument,
getopts places that argument into the variable OPTARG.
The shell does not reset OPTIND automatically; it must be manually
reset between multiple calls to getopts within the same shell
invocation if a new set of parameters is to be used.
When the end of options is encountered, getopts exits with a
return value greater than zero.
OPTIND is set to the index of the first non-option argument,
and name is set to ‘?’.
getopts
normally parses the positional parameters, but if more arguments are
given in args, getopts parses those instead.
getopts can report errors in two ways. If the first character of
optstring is a colon, silent
error reporting is used. In normal operation diagnostic messages
are printed when invalid options or missing option arguments are
encountered.
If the variable OPTERR
is set to 0, no error messages will be displayed, even if the first
character of optstring is not a colon.
If an invalid option is seen,
getopts places ‘?’ into name and, if not silent,
prints an error message and unsets OPTARG.
If getopts is silent, the option character found is placed in
OPTARG and no diagnostic message is printed.
If a required argument is not found, and getopts
is not silent, a question mark (‘?’) is placed in name,
OPTARG is unset, and a diagnostic message is printed.
If getopts is silent, then a colon (‘:’) is placed in
name and OPTARG is set to the option character found.
hashhash [-r] [-p filename] [-dt] [name]
Remember the full pathnames of commands specified as name arguments,
so they need not be searched for on subsequent invocations.
The commands are found by searching through the directories listed in
$PATH.
The -p option inhibits the path search, and filename is
used as the location of name.
The -r option causes the shell to forget all remembered locations.
The -d option causes the shell to forget the remembered location
of each name.
If the -t option is supplied, the full pathname to which each
name corresponds is printed. If multiple name arguments are
supplied with -t the name is printed before the hashed
full pathname.
The -l option causes output to be displayed in a format
that may be reused as input.
If no arguments are given, or if only -l is supplied,
information about remembered commands is printed.
The return status is zero unless a name is not found or an invalid
option is supplied.
pwdpwd [-LP]
Print the absolute pathname of the current working directory.
If the -P option is supplied, the pathname printed will not
contain symbolic links.
If the -L option is supplied, the pathname printed may contain
symbolic links.
The return status is zero unless an error is encountered while
determining the name of the current directory or an invalid option
is supplied.
readonlyreadonly [-aApf] [name[=value]] ...
Mark each name as readonly.
The values of these names may not be changed by subsequent assignment.
If the -f option is supplied, each name refers to a shell
function.
The -a option means each name refers to an indexed
array variable; the -A option means each name refers
to an associative array variable.
If no name arguments are given, or if the -p
option is supplied, a list of all readonly names is printed.
The -p option causes output to be displayed in a format that
may be reused as input.
If a variable name is followed by =value, the value of
the variable is set to value.
The return status is zero unless an invalid option is supplied, one of
the name arguments is not a valid shell variable or function name,
or the -f option is supplied with a name that is not a shell function.
returnreturn [n]
Cause a shell function to exit with the return value n.
If n is not supplied, the return value is the exit status of the
last command executed in the function.
This may also be used to terminate execution of a script being executed
with the . (or source) builtin, returning either n or
the exit status of the last command executed within the script as the exit
status of the script.
Any command associated with the RETURN trap is executed
before execution resumes after the function or script.
The return status is non-zero if return is used outside a function
and not during the execution of a script by . or source.
shiftshift [n]
Shift the positional parameters to the left by n.
The positional parameters from n+1 ... $# are
renamed to $1 ... $#-n.
Parameters represented by the numbers $# to $#-n+1
are unset.
n must be a non-negative number less than or equal to $#.
If n is zero or greater than $#, the positional parameters
are not changed.
If n is not supplied, it is assumed to be 1.
The return status is zero unless n is greater than $# or
less than zero, non-zero otherwise.
test[test does not accept any options, nor does it accept and ignore
an argument of -- as signifying the end of options.
When the [ form is used, the last argument to the command must
be a ].
Expressions may be combined using the following operators, listed in decreasing order of precedence. The evaluation depends on the number of arguments; see below.
! expr( expr ) -a expr2 -o expr2The test and [ builtins evaluate conditional
expressions using a set of rules based on the number of arguments.
timestimes
Print out the user and system times used by the shell and its children.
The return status is zero.
traptrap [-lp] [arg] [sigspec ...]
The commands in arg are to be read and executed when the
shell receives signal sigspec. If arg is absent (and
there is a single sigspec) or
equal to ‘-’, each specified signal's disposition is reset
to the value it had when the shell was started.
If arg is the null string, then the signal specified by
each sigspec is ignored by the shell and commands it invokes.
If arg is not present and -p has been supplied,
the shell displays the trap commands associated with each sigspec.
If no arguments are supplied, or
only -p is given, trap prints the list of commands
associated with each signal number in a form that may be reused as
shell input.
The -l option causes the shell to print a list of signal names
and their corresponding numbers.
Each sigspec is either a signal name or a signal number.
Signal names are case insensitive and the SIG prefix is optional.
If a sigspec
is 0 or EXIT, arg is executed when the shell exits.
If a sigspec is DEBUG, the command arg is executed
before every simple command, for command, case command,
select command, every arithmetic for command, and before
the first command executes in a shell function.
Refer to the description of the extdebug option to the
shopt builtin (see The Shopt Builtin) for details of its
effect on the DEBUG trap.
If a sigspec is RETURN, the command arg is executed
each time a shell function or a script executed with the . or
source builtins finishes executing.
If a sigspec is ERR, the command arg
is executed whenever a simple command has a non-zero exit status,
subject to the following conditions.
The ERR trap is not executed if the failed command is part of the
command list immediately following an until or while keyword,
part of the test following the if or elif reserved words,
part of a command executed in a && or || list,
or if the command's return
status is being inverted using !.
These are the same conditions obeyed by the errexit option.
Signals ignored upon entry to the shell cannot be trapped or reset. Trapped signals that are not being ignored are reset to their original values in a subshell or subshell environment when one is created.
The return status is zero unless a sigspec does not specify a
valid signal.
umaskumask [-p] [-S] [mode]
Set the shell process's file creation mask to mode. If
mode begins with a digit, it is interpreted as an octal number;
if not, it is interpreted as a symbolic mode mask similar
to that accepted by the chmod command. If mode is
omitted, the current value of the mask is printed. If the -S
option is supplied without a mode argument, the mask is printed
in a symbolic format.
If the -p option is supplied, and mode
is omitted, the output is in a form that may be reused as input.
The return status is zero if the mode is successfully changed or if
no mode argument is supplied, and non-zero otherwise.
Note that when the mode is interpreted as an octal number, each number
of the umask is subtracted from 7. Thus, a umask of 022
results in permissions of 755.
unsetunset [-fv] [name]
Each variable or function name is removed. If no options are supplied, or the -v option is given, each name refers to a shell variable. If the -f option is given, the names refer to shell functions, and the function definition is removed. Readonly variables and functions may not be unset. The return status is zero unless a name is readonly.