Review the previous Requirements section before configuring OCI8.
To enable the OCI8 extension, configure PHP with the option --with-oci8 .
Before starting the web server, OCI8 typically requires several Oracle environment variables (see below) to locate libraries, point to configuration files, and set some basic properties such as the character set used by Oracle libraries. The variables should be set before any PHP process starts.
PHP should be run with the same, or more recent, major version of Oracle libraries as it was configured with. For example, if you build OCI8 with Oracle 11.2 libraries, then PHP should also be deployed and run with Oracle 11.2 libraries.
The configuration shared option builds OCI8 as a shared library that can be dynamically loaded into PHP. Building a shared extension allows OCI8 to be upgraded easily without impacting the rest of PHP.
Configure OCI8 using one of the following configure options.
If using Oracle Instant Client, then do:
./configure --with-oci8=shared,instantclient,/path/to/instant/client/lib
If Instant Client is installed from ZIP files, make sure to create the library symbolic link, for example ln -s libclntsh.so.11.1 libclntsh.so.
If using an RPM-based installation of Oracle Instant Client, the configure line will look like this:
./configure --with-oci8=shared,instantclient,/usr/lib/oracle/<version>/client/lib
For example, --with-oci8=shared,instantclient,/usr/lib/oracle/11.2/client/lib .
Note that Oracle Instant Client support first appeared in PHP 4.3.11 and 5.0.4 and originally used the option --with-oci8-instant-client to configure PHP.
If using an Oracle database or full Oracle Client installation then do:
./configure --with-oci8=shared,$ORACLE_HOME
Make sure the web server user (nobody, www) has access to the libraries, initialization files and tnsnames.ora (if used) under the $ORACLE_HOME directory. With Oracle 10gR2, you may need to run the $ORACLE_HOME/install/changePerm.sh utility to give directory access.
After configuration, follow the usual PHP building procedure, e.g. make install. The OCI8 shared extension oci8.so library will be created. It may need to be manually moved to the PHP extension directory, specified by the extension_dir option in your php.ini file.
To complete installation of OCI8, edit php.ini and add the line:
extension=oci8.so
Configure OCI8 using one of the following configure options.
If using Oracle Instant Client, then do:
./configure --with-oci8=instantclient,/path/to/instant/client/lib
If using an Oracle database or full Oracle Client installation then do:
./configure --with-oci8=$ORACLE_HOME
After configuration, follow the usual PHP building procedure, e.g. make install. After successful compilation, you do not need to add oci8.so to php.ini. No additional build steps are required.
The OCI8 extension can be added to an existing PHP installation either automatically or manually from » http://pecl.php.net/. 安装此 PECL 扩展相关的信息可在手册中标题为 PECL 扩展的安装 章节中找到。另外的信息,如新的发行版本、下载、源文件、 Additional information such as new releases,维护人员信息及变更日志等,都在此处: » http://pecl.php.net/package/oci8.
For an automated install follow these steps:
If you are behind a firewall, set PEAR's proxy, for example:
pear config-set http_proxy http://my-proxy.example.com:80/
Run
pecl install oci8
When prompted, enter either the value of $ORACLE_HOME, or instantclient,/path/to/instant/client/lib.
Note: Do not enter the variable $ORACLE_HOME because it will not be expanded. Instead, enter the actual path of the Oracle home directory.
For a manual install, download the PECL OCI8 package, e.g. oci8-1.3.5.tgz.
Extract the package:
tar -zxf oci8-1.3.5.tgz cd oci8-1.3.5
Prepare the package:
phpize
Configure the package, either using $ORACLE_HOME or Instant Client
./configure -with-oci8=shared,$ORACLE_HOME
or
./configure -with-oci8=shared,instantclient,/path/to/instant/client/lib
Install the package:
make install
After either an automatic or manual install, edit your php.ini file and add the line:
extension=oci8.so
Make sure the php.ini directive extension_dir is set to the directory that oci8.so was installed in.
On Windows, uncomment the php.ini line extension=php_oci8.dll when using Oracle 10gR2 client libraries. Uncomment extension=php_oci8_11g.dll when using Oracle 11g client libraries. These two DLLs contain equivalent functionality and only one may be enabled at a time. Make sure extension_dir is set to the directory containing the PHP extension DLLs.
If using Instant Client, set the system PATH environment variable to the Oracle library directory.
Before using this extension, make sure that the Oracle environment variables are properly set for the web daemon user. If your web server is automatically started at boot time then make sure that the boot-time environment is also configured correctly.
Note:
Do not set Oracle environment variables using putenv() in a PHP script because Oracle libraries may be loaded and initialized before your script runs. Variables set with putenv() may then cause conflicts, crashes, or unpredictable behavior. Some functions may work but others might give subtle errors. The variables should be set up before the web server is started.
On Red Hat Linux and variants, export variables at the end of /etc/sysconfig/httpd. Other systems with Apache 2 may use an envvars script in the Apache bin directory. A third option, the Apache SetEnv directive in httpd.conf, may work in some systems but is known to be insufficient in others.
To check that environment variables are set correctly, use phpinfo() and check the Environment (not the Apache Environment) section contains the expected variables.
The variables that might be needed are included in the following table. Refer to the Oracle documentation for more information on all the variables.
Name | Purpose |
---|---|
ORACLE_HOME | Contains the directory of the full Oracle Database software. Do not set this when using Oracle Instant Client as it is unnecessary and may cause installation problems. |
ORACLE_SID | Contains the name of the database on the local machine to be connected to. There is no need to set this if you using Oracle Instant Client, or always pass the connection parameter to oci_connect(). |
LD_LIBRARY_PATH | Set this (or its platform equivalent, such as DYLD_LIBRARY_PATH, LIBPATH, or SHLIB_PATH) to the location of the Oracle libraries, for example $ORACLE_HOME/lib or /usr/lib/oracle/11.1/client/lib. This variable is not needed if the libraries are located by a different search mechanism, such as with ldconfig or with LD_PRELOAD. |
NLS_LANG | This is the primary variable for setting the character set and globalization information used by the Oracle libraries. |
ORA_SDTZ | Sets the Oracle session timezone. |
TNS_ADMIN | Contains the directory where the Oracle Net Services configuration files such as tnsnames.ora and sqlnet.ora are kept. Not needed if the oci_connect() connection string uses the Easy Connect naming syntax such as localhost/XE. Not needed if the network configuration files are in one of the default locations such as $ORACLE_HOME/network/admin or /etc. |
The most common problem with installing OCI8 is not having the Oracle environment correctly set. This typically appears as a problem using oci_connect() or oci_pconnect(). The error may be a PHP error such as Call to undefined function oci_connect(), an Oracle error such as ORA-12705, or even an Apache crash. Check the Apache log files for startup errors and see the sections above to resolve this problem.
While network errors like ORA-12154 or ORA-12514 indicate an Oracle network naming or configuration issue, the root cause may be because the PHP environment is incorrectly set up and Oracle libraries are unable to locate the tnsnames.ora configuration file.
On Windows, having multiple versions of Oracle on the one machine can easily cause library clashes unless care is taken to make sure PHP only uses the correct version of Oracle.
A utility to examine what libraries are being looked for and loaded can help resolve missing or clashing library issues, particularly on Windows.
Note: If the web server doesn't start or crashes at startup
Check that Apache is linked with the pthread library:
# ldd /www/apache/bin/httpd libpthread.so.0 => /lib/libpthread.so.0 (0x4001c000) libm.so.6 => /lib/libm.so.6 (0x4002f000) libcrypt.so.1 => /lib/libcrypt.so.1 (0x4004c000) libdl.so.2 => /lib/libdl.so.2 (0x4007a000) libc.so.6 => /lib/libc.so.6 (0x4007e000) /lib/ld-linux.so.2 => /lib/ld-linux.so.2 (0x40000000)If the libpthread is not listed, then reinstall Apache:
# cd /usr/src/apache_1.3.xx # make clean # LIBS=-lpthread ./config.status # make # make installPlease note that on some systems like UnixWare, it is libthread instead of libpthread. PHP and Apache have to be configured with EXTRA_LIBS=-lthread.