Random (Java Platform SE 7 )

java.lang.Object
- java.util.Random

All Implemented Interfaces:

Serializable

Direct Known Subclasses:

SecureRandom, ThreadLocalRandom
```
public class Random
extends Object
implements Serializable
```
An instance of this class is used to generate a stream of pseudorandom numbers. The class uses a 48-bit seed, which is modified using a linear congruential formula. (See Donald Knuth, The Art of Computer Programming, Volume 2, Section 3.2.1.)
If two instances of Random are created with the same seed, and the same sequence of method calls is made for each, they will generate and return identical sequences of numbers. In order to guarantee this property, particular algorithms are specified for the class Random. Java implementations must use all the algorithms shown here for the class Random, for the sake of absolute portability of Java code. However, subclasses of class Random are permitted to use other algorithms, so long as they adhere to the general contracts for all the methods.
The algorithms implemented by class Random use a protected utility method that on each invocation can supply up to 32 pseudorandomly generated bits.
Many applications will find the method Math.random() simpler to use.
Instances of java.util.Random are threadsafe. However, the concurrent use of the same java.util.Random instance across threads may encounter contention and consequent poor performance. Consider instead using ThreadLocalRandom in multithreaded designs.
Instances of java.util.Random are not cryptographically secure. Consider instead using SecureRandom to get a cryptographically secure pseudo-random number generator for use by security-sensitive applications.

Since:

1.0

See Also:
Serialized Form

Constructor Summary

Constructors
Constructor and Description

Random()
Creates a new random number generator.

Random(long seed)
Creates a new random number generator using a single long seed.

Constructors
Constructor and Description
`Random()` Creates a new random number generator.
`Random(long seed)` Creates a new random number generator using a single `long` seed.

Method Summary

Methods
Modifier and Type	Method and Description
`protected int`	`next(int bits)` Generates the next pseudorandom number.
`boolean`	`nextBoolean()` Returns the next pseudorandom, uniformly distributed `boolean` value from this random number generator's sequence.
`void`	`nextBytes(byte[] bytes)` Generates random bytes and places them into a user-supplied byte array.
`double`	`nextDouble()` Returns the next pseudorandom, uniformly distributed `double` value between `0.0` and `1.0` from this random number generator's sequence.
`float`	`nextFloat()` Returns the next pseudorandom, uniformly distributed `float` value between `0.0` and `1.0` from this random number generator's sequence.
`double`	`nextGaussian()` Returns the next pseudorandom, Gaussian ("normally") distributed `double` value with mean `0.0` and standard deviation `1.0` from this random number generator's sequence.
`int`	`nextInt()` Returns the next pseudorandom, uniformly distributed `int` value from this random number generator's sequence.
`int`	`nextInt(int n)` Returns a pseudorandom, uniformly distributed `int` value between 0 (inclusive) and the specified value (exclusive), drawn from this random number generator's sequence.
`long`	`nextLong()` Returns the next pseudorandom, uniformly distributed `long` value from this random number generator's sequence.
`void`	`setSeed(long seed)` Sets the seed of this random number generator using a single `long` seed.

Methods inherited from class java.lang.Object
clone, equals, finalize, getClass, hashCode, notify, notifyAll, toString, wait, wait, wait

- Constructor Detail
  - Random
```
public Random()
```
    Creates a new random number generator. This constructor sets the seed of the random number generator to a value very likely to be distinct from any other invocation of this constructor.
  - Random
```
public Random(long seed)
```
    Creates a new random number generator using a single long seed. The seed is the initial value of the internal state of the pseudorandom number generator which is maintained by method next(int).
    The invocation new Random(seed) is equivalent to:
```
 Random rnd = new Random();
 rnd.setSeed(seed);
```
    Parameters:
    seed - the initial seed
    See Also:
    setSeed(long)
- Method Detail
  - setSeed
```
public void setSeed(long seed)
```
    Sets the seed of this random number generator using a single long seed. The general contract of setSeed is that it alters the state of this random number generator object so as to be in exactly the same state as if it had just been created with the argument seed as a seed. The method setSeed is implemented by class Random by atomically updating the seed to
```
(seed ^ 0x5DEECE66DL) & ((1L << 48) - 1)
```
    and clearing the haveNextNextGaussian flag used by nextGaussian().
    The implementation of setSeed by class Random happens to use only 48 bits of the given seed. In general, however, an overriding method may use all 64 bits of the long argument as a seed value.
    Parameters:
    seed - the initial seed
  - next
```
protected int next(int bits)
```
    Generates the next pseudorandom number. Subclasses should override this, as this is used by all other methods.
    The general contract of next is that it returns an int value and if the argument bits is between 1 and 32 (inclusive), then that many low-order bits of the returned value will be (approximately) independently chosen bit values, each of which is (approximately) equally likely to be 0 or 1. The method next is implemented by class Random by atomically updating the seed to
```
(seed * 0x5DEECE66DL + 0xBL) & ((1L << 48) - 1)
```
    and returning
```
(int)(seed >>> (48 - bits)).
```
    This is a linear congruential pseudorandom number generator, as defined by D. H. Lehmer and described by Donald E. Knuth in The Art of Computer Programming, Volume 3: Seminumerical Algorithms, section 3.2.1.
    Parameters:
    bits - random bits
    
    Returns:
    the next pseudorandom value from this random number generator's sequence
    Since:
    
    1.1
  - nextBytes
```
public void nextBytes(byte[] bytes)
```
    Generates random bytes and places them into a user-supplied byte array. The number of random bytes produced is equal to the length of the byte array.
    The method nextBytes is implemented by class Random as if by:
```
 public void nextBytes(byte[] bytes) {
   for (int i = 0; i < bytes.length; )
     for (int rnd = nextInt(), n = Math.min(bytes.length - i, 4);
          n-- > 0; rnd >>= 8)
       bytes[i++] = (byte)rnd;
 }
```
    Parameters:
    bytes - the byte array to fill with random bytes
    
    Throws:
    
    NullPointerException - if the byte array is null
    Since:
    
    1.1
  - nextInt
```
public int nextInt()
```
    Returns the next pseudorandom, uniformly distributed int value from this random number generator's sequence. The general contract of nextInt is that one int value is pseudorandomly generated and returned. All 2³² possible int values are produced with (approximately) equal probability.
    The method nextInt is implemented by class Random as if by:
```
 public int nextInt() {
   return next(32);
 }
```
    Returns:
    the next pseudorandom, uniformly distributed int value from this random number generator's sequence
  - nextInt
```
public int nextInt(int n)
```
    Returns a pseudorandom, uniformly distributed int value between 0 (inclusive) and the specified value (exclusive), drawn from this random number generator's sequence. The general contract of nextInt is that one int value in the specified range is pseudorandomly generated and returned. All n possible int values are produced with (approximately) equal probability. The method nextInt(int n) is implemented by class Random as if by:
```
 public int nextInt(int n) {
   if (n <= 0)
     throw new IllegalArgumentException("n must be positive");

   if ((n & -n) == n)  // i.e., n is a power of 2
     return (int)((n * (long)next(31)) >> 31);

   int bits, val;
   do {
       bits = next(31);
       val = bits % n;
   } while (bits - val + (n-1) < 0);
   return val;
 }
```
    The hedge "approximately" is used in the foregoing description only because the next method is only approximately an unbiased source of independently chosen bits. If it were a perfect source of randomly chosen bits, then the algorithm shown would choose int values from the stated range with perfect uniformity.
    The algorithm is slightly tricky. It rejects values that would result in an uneven distribution (due to the fact that 2^31 is not divisible by n). The probability of a value being rejected depends on n. The worst case is n=2^30+1, for which the probability of a reject is 1/2, and the expected number of iterations before the loop terminates is 2.
    The algorithm treats the case where n is a power of two specially: it returns the correct number of high-order bits from the underlying pseudo-random number generator. In the absence of special treatment, the correct number of low-order bits would be returned. Linear congruential pseudo-random number generators such as the one implemented by this class are known to have short periods in the sequence of values of their low-order bits. Thus, this special case greatly increases the length of the sequence of values returned by successive calls to this method if n is a small power of two.
    Parameters:
    n - the bound on the random number to be returned. Must be positive.
    
    Returns:
    the next pseudorandom, uniformly distributed int value between 0 (inclusive) and n (exclusive) from this random number generator's sequence
    
    Throws:
    
    IllegalArgumentException - if n is not positive
    Since:
    
    1.2
  - nextLong
```
public long nextLong()
```
    Returns the next pseudorandom, uniformly distributed long value from this random number generator's sequence. The general contract of nextLong is that one long value is pseudorandomly generated and returned.
    The method nextLong is implemented by class Random as if by:
```
 public long nextLong() {
   return ((long)next(32) << 32) + next(32);
 }
```
    Because class Random uses a seed with only 48 bits, this algorithm will not return all possible long values.
    Returns:
    the next pseudorandom, uniformly distributed long value from this random number generator's sequence
  - nextBoolean
```
public boolean nextBoolean()
```
    Returns the next pseudorandom, uniformly distributed boolean value from this random number generator's sequence. The general contract of nextBoolean is that one boolean value is pseudorandomly generated and returned. The values true and false are produced with (approximately) equal probability.
    The method nextBoolean is implemented by class Random as if by:
```
 public boolean nextBoolean() {
   return next(1) != 0;
 }
```
    Returns:
    the next pseudorandom, uniformly distributed boolean value from this random number generator's sequence
    Since:
    
    1.2
  - nextFloat
```
public float nextFloat()
```
    Returns the next pseudorandom, uniformly distributed float value between 0.0 and 1.0 from this random number generator's sequence.
    The general contract of nextFloat is that one float value, chosen (approximately) uniformly from the range 0.0f (inclusive) to 1.0f (exclusive), is pseudorandomly generated and returned. All 2²⁴ possible float values of the form m x 2^-24, where m is a positive integer less than 2²⁴ , are produced with (approximately) equal probability.
    The method nextFloat is implemented by class Random as if by:
```
 public float nextFloat() {
   return next(24) / ((float)(1 << 24));
 }
```
    The hedge "approximately" is used in the foregoing description only because the next method is only approximately an unbiased source of independently chosen bits. If it were a perfect source of randomly chosen bits, then the algorithm shown would choose float values from the stated range with perfect uniformity.
    [In early versions of Java, the result was incorrectly calculated as:
```
 return next(30) / ((float)(1 << 30));
```
    This might seem to be equivalent, if not better, but in fact it introduced a slight nonuniformity because of the bias in the rounding of floating-point numbers: it was slightly more likely that the low-order bit of the significand would be 0 than that it would be 1.]
    Returns:
    the next pseudorandom, uniformly distributed float value between 0.0 and 1.0 from this random number generator's sequence
  - nextDouble
```
public double nextDouble()
```
    Returns the next pseudorandom, uniformly distributed double value between 0.0 and 1.0 from this random number generator's sequence.
    The general contract of nextDouble is that one double value, chosen (approximately) uniformly from the range 0.0d (inclusive) to 1.0d (exclusive), is pseudorandomly generated and returned.
    The method nextDouble is implemented by class Random as if by:
```
 public double nextDouble() {
   return (((long)next(26) << 27) + next(27))
     / (double)(1L << 53);
 }
```
    The hedge "approximately" is used in the foregoing description only because the next method is only approximately an unbiased source of independently chosen bits. If it were a perfect source of randomly chosen bits, then the algorithm shown would choose double values from the stated range with perfect uniformity.
    [In early versions of Java, the result was incorrectly calculated as:
```
 return (((long)next(27) << 27) + next(27))
     / (double)(1L << 54);
```
    This might seem to be equivalent, if not better, but in fact it introduced a large nonuniformity because of the bias in the rounding of floating-point numbers: it was three times as likely that the low-order bit of the significand would be 0 than that it would be 1! This nonuniformity probably doesn't matter much in practice, but we strive for perfection.]
    Returns:
    the next pseudorandom, uniformly distributed double value between 0.0 and 1.0 from this random number generator's sequence
    See Also:
    Math.random()
  - nextGaussian
```
public double nextGaussian()
```
    Returns the next pseudorandom, Gaussian ("normally") distributed double value with mean 0.0 and standard deviation 1.0 from this random number generator's sequence.
    The general contract of nextGaussian is that one double value, chosen from (approximately) the usual normal distribution with mean 0.0 and standard deviation 1.0, is pseudorandomly generated and returned.
    The method nextGaussian is implemented by class Random as if by a threadsafe version of the following:
```
 private double nextNextGaussian;
 private boolean haveNextNextGaussian = false;

 public double nextGaussian() {
   if (haveNextNextGaussian) {
     haveNextNextGaussian = false;
     return nextNextGaussian;
   } else {
     double v1, v2, s;
     do {
       v1 = 2 * nextDouble() - 1;   // between -1.0 and 1.0
       v2 = 2 * nextDouble() - 1;   // between -1.0 and 1.0
       s = v1 * v1 + v2 * v2;
     } while (s >= 1 || s == 0);
     double multiplier = StrictMath.sqrt(-2 * StrictMath.log(s)/s);
     nextNextGaussian = v2 * multiplier;
     haveNextNextGaussian = true;
     return v1 * multiplier;
   }
 }
```
    This uses the polar method of G. E. P. Box, M. E. Muller, and G. Marsaglia, as described by Donald E. Knuth in The Art of Computer Programming, Volume 3: Seminumerical Algorithms, section 3.4.1, subsection C, algorithm P. Note that it generates two independent values at the cost of only one call to StrictMath.log and one call to StrictMath.sqrt.
    Returns:
    the next pseudorandom, Gaussian ("normally") distributed double value with mean 0.0 and standard deviation 1.0 from this random number generator's sequence

Submit a bug or feature
For further API reference and developer documentation, see Java SE Documentation. That documentation contains more detailed, developer-targeted descriptions, with conceptual overviews, definitions of terms, workarounds, and working code examples.
Copyright © 1993, 2012, Oracle and/or its affiliates. All rights reserved.

Class Random

Constructor Summary

Method Summary

Methods inherited from class java.lang.Object

Constructor Detail

Random

Random

Method Detail

setSeed

next

nextBytes

nextInt

nextInt

nextLong

nextBoolean

nextFloat

nextDouble

nextGaussian