WindowManager.LayoutParams

Value for screenBrightness and buttonBrightness indicating that the screen or button backlight brightness should be set to the hightest value when this window is in front.

Default value for screenBrightness and buttonBrightness indicating that the brightness value is not overridden for this window and normal brightness policy should be used.

Value for screenBrightness and buttonBrightness indicating that the screen or button backlight brightness should be set to the lowest value when this window is in front.

Start of window types that represent normal application windows.

Start of types of sub-windows. The token of these windows must be set to the window they are attached to. These types of windows are kept next to their attached window in Z-order, and their coordinate space is relative to their attached window.

Start of system-specific window types. These are not normally created by applications.

Window flag: as long as this window is visible to the user, allow the lock screen to activate while the screen is on. This can be used independently, or in combination with FLAG_KEEP_SCREEN_ON and/or FLAG_SHOW_WHEN_LOCKED

Window flag: invert the state of FLAG_NOT_FOCUSABLE with respect to how this window interacts with the current method. That is, if FLAG_NOT_FOCUSABLE is set and this flag is set, then the window will behave as if it needs to interact with the input method and thus be placed behind/away from it; if FLAG_NOT_FOCUSABLE is not set and this flag is set, then the window will behave as if it doesn't need to interact with the input method and can be placed to use more space and cover the input method.

Window flag: blur everything behind this window.

Window flag: everything behind this window will be dimmed. Use dimAmount to control the amount of dim.

Window flag: when set the window will cause the keyguard to be dismissed, only if it is not a secure lock keyguard. Because such a keyguard is not needed for security, it will never re-appear if the user navigates to another window (in contrast to FLAG_SHOW_WHEN_LOCKED, which will only temporarily hide both secure and non-secure keyguards but ensure they reappear when the user moves to another UI that doesn't hide them). If the keyguard is currently active and is secure (requires an unlock pattern) than the user will still need to confirm it before seeing this window, unless FLAG_SHOW_WHEN_LOCKED has also been set.

Window flag: turn on dithering when compositing this window to the screen.

Window flag: Override {@link #FLAG_FULLSCREEN and force the screen decorations (such as status bar) to be shown.

Window flag: Hide all screen decorations (e.g. status bar) while this window is displayed. This allows the window to use the entire display space for itself -- the status bar will be hidden when an app window with this flag set is on the top layer.

Indicates whether this window should be hardware accelerated. Requesting hardware acceleration does not guarantee it will happen.

This flag can be controlled programmatically only to enable hardware acceleration. To enable hardware acceleration for a given window programmatically, do the following:

 Window w = activity.getWindow(); // in Activity's onCreate() for instance
 w.setFlags(WindowManager.LayoutParams.FLAG_HARDWARE_ACCELERATED,
         WindowManager.LayoutParams.FLAG_HARDWARE_ACCELERATED);
 

It is important to remember that this flag must be set before setting the content view of your activity or dialog.

This flag cannot be used to disable hardware acceleration after it was enabled in your manifest using hardwareAccelerated. If you need to selectively and programmatically disable hardware acceleration (for automated testing for instance), make sure it is turned off in your manifest and enable it on your activity or dialog when you need it instead, using the method described above.

This flag is automatically set by the system if the android:hardwareAccelerated XML attribute is set to true on an activity or on the application.

Window flag: intended for windows that will often be used when the user is holding the screen against their face, it will aggressively filter the event stream to prevent unintended presses in this situation that may not be desired for a particular window, when such an event stream is detected, the application will receive a CANCEL motion event to indicate this so applications can handle this accordingly by taking no action on the event until the finger is released.

Window flag: as long as this window is visible to the user, keep the device's screen turned on and bright.

Window flag: a special option only for use in combination with FLAG_LAYOUT_IN_SCREEN. When requesting layout in the screen your window may appear on top of or behind screen decorations such as the status bar. By also including this flag, the window manager will report the inset rectangle needed to ensure your content is not covered by screen decorations. This flag is normally set for you by Window as described in setFlags(int, int).

Window flag: place the window within the entire screen, ignoring decorations around the border (a.k.a. the status bar). The window must correctly position its contents to take the screen decoration into account. This flag is normally set for you by Window as described in setFlags(int, int).

Window flag: allow window to extend outside of the screen.

Window flag: this window won't ever get key input focus, so the user can not send key or other button events to it. Those will instead go to whatever focusable window is behind it. This flag will also enable FLAG_NOT_TOUCH_MODAL whether or not that is explicitly set.

Setting this flag also implies that the window will not need to interact with a soft input method, so it will be Z-ordered and positioned independently of any active input method (typically this means it gets Z-ordered on top of the input method, so it can use the full screen for its content and cover the input method if needed. You can use FLAG_ALT_FOCUSABLE_IM to modify this behavior.

Window flag: this window can never receive touch events.

Window flag: Even when this window is focusable (its {@link #FLAG_NOT_FOCUSABLE is not set), allow any pointer events outside of the window to be sent to the windows behind it. Otherwise it will consume all pointer events itself, regardless of whether they are inside of the window.

Window flag: a special mode where the layout parameters are used to perform scaling of the surface when it is composited to the screen.

Window flag: don't allow screen shots while this window is displayed. Maps to Surface.SECURE.

Window flag: ask that the system wallpaper be shown behind your window. The window surface must be translucent to be able to actually see the wallpaper behind it; this flag just ensures that the wallpaper surface will be there if this window actually has translucent regions.

Window flag: special flag to let windows be shown when the screen is locked. This will let application windows take precedence over key guard or any other lock screens. Can be used with FLAG_KEEP_SCREEN_ON to turn screen on and display windows directly before showing the key guard window. Can be used with FLAG_DISMISS_KEYGUARD to automatically fully dismisss non-secure keyguards. This flag only applies to the top-most full-screen window.

Window flag: when set the window will accept for touch events outside of its bounds to be sent to other windows that also support split touch. When this flag is not set, the first pointer that goes down determines the window to which all subsequent touches go until all pointers go up. When this flag is set, each pointer (not necessarily the first) that goes down determines the window to which all subsequent touches of that pointer will go until that pointer goes up thereby enabling touches with multiple pointers to be split across multiple windows.

Window flag: When set, if the device is asleep when the touch screen is pressed, you will receive this first touch event. Usually the first touch event is consumed by the system since the user can not see what they are pressing on.

Window flag: when set as a window is being added or made visible, once the window has been shown then the system will poke the power manager's user activity (as if the user had woken up the device) to turn the screen on.

Window flag: if you have set FLAG_NOT_TOUCH_MODAL, you can set this flag to receive a single special MotionEvent with the action MotionEvent.ACTION_OUTSIDE for touches that occur outside of your window. Note that you will not receive the full down/move/up gesture, only the location of the first down as an ACTION_OUTSIDE.

End of types of application windows.

End of types of sub-windows.

End of types of system windows.

Adjustment option for softInputMode: set to have a window not adjust for a shown input method. The window will not be resized, and it will not be panned to make its focus visible.

Adjustment option for softInputMode: set to have a window pan when an input method is shown, so it doesn't need to deal with resizing but just panned by the framework to ensure the current input focus is visible. This can not be combined with SOFT_INPUT_ADJUST_RESIZE; if neither of these are set, then the system will try to pick one or the other depending on the contents of the window.

Adjustment option for softInputMode: set to allow the window to be resized when an input method is shown, so that its contents are not covered by the input method. This can not be combined with SOFT_INPUT_ADJUST_PAN; if neither of these are set, then the system will try to pick one or the other depending on the contents of the window.

Adjustment option for softInputMode: nothing specified. The system will try to pick one or the other depending on the contents of the window.

Bit for softInputMode: set when the user has navigated forward to the window. This is normally set automatically for you by the system, though you may want to set it in certain cases when you are displaying a window yourself. This flag will always be cleared automatically after the window is displayed.

Mask for softInputMode of the bits that determine the way that the window should be adjusted to accommodate the soft input window.

Mask for softInputMode of the bits that determine the desired visibility state of the soft input area for this window.

Visibility state for softInputMode: please always hide any soft input area when this window receives focus.

Visibility state for softInputMode: please always make the soft input area visible when this window receives input focus.

Visibility state for softInputMode: please hide any soft input area when normally appropriate (when the user is navigating forward to your window).

Visibility state for softInputMode: please don't change the state of the soft input area.

Visibility state for softInputMode: no state has been specified.

Visibility state for softInputMode: please show the soft input area when normally appropriate (when the user is navigating forward to your window).

Window type: a normal application window. The token must be an Activity token identifying who the window belongs to.

Window type: like TYPE_APPLICATION_PANEL, but layout of the window happens as that of a top-level window, not as a child of its container.

Window type: window for showing media (e.g. video). These windows are displayed behind their attached window.

Window type: a panel on top of an application window. These windows appear on top of their attached window.

Window type: special application window that is displayed while the application is starting. Not for use by applications themselves; this is used by the system to display something until the application can show its own windows.

Window type: a sub-panel on top of an application window. These windows are displayed on top their attached window and any TYPE_APPLICATION_PANEL panels.

Window type: an application window that serves as the "base" window of the overall application; all other application windows will appear on top of it.

Window type: internal input methods windows, which appear above the normal UI. Application windows may be resized or panned to keep the input focus visible while this window is displayed.

Window type: internal input methods dialog windows, which appear above the current input method window.

Window type: keyguard window.

Window type: dialogs that the keyguard shows

Window type: phone. These are non-application windows providing user interaction with the phone (in particular incoming calls). These windows are normally placed above all applications, but behind the status bar.

Window type: priority phone UI, which needs to be displayed even if the keyguard is active. These windows must not take input focus, or they will interfere with the keyguard.

Window type: the search bar. There can be only one search bar window; it is placed at the top of the screen.

Window type: the status bar. There can be only one status bar window; it is placed at the top of the screen, and all other windows are shifted down so they are below it.

Window type: panel that slides out from over the status bar

Window type: system window, such as low power alert. These windows are always on top of application windows.

Window type: panel that slides out from the status bar

Window type: internal system error windows, appear on top of everything they can.

Window type: system overlay windows, which need to be displayed on top of everything else. These windows must not take input focus, or they will interfere with the keyguard.

Window type: transient notifications.

Window type: wallpaper window, placed behind any window that wants to sit on top of the wallpaper.

An alpha value to apply to this entire window. An alpha of 1.0 means fully opaque and 0.0 means fully transparent

This can be used to override the standard behavior of the button and keyboard backlights. A value of less than 0, the default, means to use the standard backlight behavior. 0 to 1 adjusts the brightness from dark to full bright.

When FLAG_DIM_BEHIND is set, this is the amount of dimming to apply. Range is from 1.0 for completely opaque to 0.0 for no dim.

Various behavioral options/flags. Default is none.

The desired bitmap format. May be one of the constants in PixelFormat. Default is OPAQUE.

Placement of window within the screen as per Gravity. Both Gravity.apply and Gravity.applyDisplay are used during window layout, with this value given as the desired gravity. For example you can specify Gravity.DISPLAY_CLIP_HORIZONTAL and Gravity.DISPLAY_CLIP_VERTICAL here to control the behavior of Gravity.applyDisplay.

The horizontal margin, as a percentage of the container's width, between the container and the widget. See Gravity.apply for how this is used. This field is added with x to supply the xAdj parameter.

Indicates how much of the extra space will be allocated horizontally to the view associated with these LayoutParams. Specify 0 if the view should not be stretched. Otherwise the extra pixels will be pro-rated among all views whose weight is greater than 0.

Name of the package owning this window.

This can be used to override the user's preferred brightness of the screen. A value of less than 0, the default, means to use the preferred screen brightness. 0 to 1 adjusts the brightness from dark to full bright.

Specific orientation value for a window. May be any of the same values allowed for screenOrientation. If not set, a default value of SCREEN_ORIENTATION_UNSPECIFIED will be used.

Desired operating mode for any soft input area. May be any combination of:

• One of the visibility states SOFT_INPUT_STATE_UNSPECIFIED, SOFT_INPUT_STATE_UNCHANGED, SOFT_INPUT_STATE_HIDDEN, SOFT_INPUT_STATE_ALWAYS_VISIBLE, or SOFT_INPUT_STATE_VISIBLE.
• One of the adjustment options SOFT_INPUT_ADJUST_UNSPECIFIED, SOFT_INPUT_ADJUST_RESIZE, or SOFT_INPUT_ADJUST_PAN.

Control the visibility of the status bar.

Identifier for this window. This will usually be filled in for you.

The general type of window. There are three main classes of window types:

• Application windows (ranging from FIRST_APPLICATION_WINDOW to LAST_APPLICATION_WINDOW) are normal top-level application windows. For these types of windows, the token must be set to the token of the activity they are a part of (this will normally be done for you if token is null).
• Sub-windows (ranging from FIRST_SUB_WINDOW to LAST_SUB_WINDOW) are associated with another top-level window. For these types of windows, the token must be the token of the window it is attached to.
• System windows (ranging from FIRST_SYSTEM_WINDOW to LAST_SYSTEM_WINDOW) are special types of windows for use by the system for specific purposes. They should not normally be used by applications, and a special permission is required to use them.

The vertical margin, as a percentage of the container's height, between the container and the widget. See Gravity.apply for how this is used. This field is added with y to supply the yAdj parameter.

Indicates how much of the extra space will be allocated vertically to the view associated with these LayoutParams. Specify 0 if the view should not be stretched. Otherwise the extra pixels will be pro-rated among all views whose weight is greater than 0.

A style resource defining the animations to use for this window. This must be a system resource; it can not be an application resource because the window manager does not have access to applications.

X position for this window. With the default gravity it is ignored. When using LEFT or START or RIGHT or END it provides an offset from the given edge.

Y position for this window. With the default gravity it is ignored. When using TOP or BOTTOM it provides an offset from the given edge.

Returns a String representation of this set of layout parameters.

Describe the kinds of special objects contained in this Parcelable's marshalled representation.

Given a particular set of window manager flags, determine whether such a window may be a target for an input method when it has focus. In particular, this checks the FLAG_NOT_FOCUSABLE and FLAG_ALT_FOCUSABLE_IM flags and returns true if the combination of the two corresponds to a window that needs to be behind the input method so that the user can type into it.

Returns a string containing a concise, human-readable description of this object. Subclasses are encouraged to override this method and provide an implementation that takes into account the object's type and data. The default implementation is equivalent to the following expression:

   getClass().getName() + '@' + Integer.toHexString(hashCode())

See Writing a useful toString method if you intend implementing your own toString method.

Flatten this object in to a Parcel.